Prusa · Czech Republic
Core One+ INDX
$2,249 8 tools, assembled. 4-tool from $1,999; kits from $1,699
The Core One+ with Bondtech's 8-tool INDX changer: up to eight filaments of any brand, no purge tower, fully open source. Promising, but launch units have had nozzle and calibration teething troubles.
- Build volume
- 248 × 205 × 270 mm
- Max speed
- —
- Enclosure
- Heated chamber
- Multi-color
- Included
- Camera
- Optional
- LAN & privacy
- Local-first
About the Core One+ INDX
INDX turns Prusa's enclosed CoreXY Core One+ into a tool changer. A single induction-heated "Smart Head" picks up lightweight passive nozzles from a rack, so a color change takes about 12 seconds and only a few milligrams of priming — no purge tower and no proprietary spools, since any 1.75 mm filament works. Tools can carry different nozzle sizes, and it's all open source and repairable like every Prusa.
The launch has been bumpy: early nozzles shipped surface-hardened rather than fully hardened, reviewers hit calibration failures with non-Prusa filament, the hardware blocks the camera's view, and the build volume ended up smaller than the plain Core One+. New orders are quoted to ship after late December. A 4-tool version and DIY kits are cheaper, and existing Core One+ owners can buy a conversion kit.
Pros & cons
What's good
- Up to 8 materials with no purge tower and almost no waste
- Works with any brand of 1.75 mm filament — no RFID spools needed
- Open source, repairable, with local PrusaLink control
- Actively heated 55 °C chamber
What to watch
- Early nozzles were only surface-hardened and wear on abrasive filaments
- Calibration problems with non-Prusa filament reported at launch
- Smaller 248 × 205 × 270 mm build volume than the plain Core One+
- Long backlog — new orders ship after late December
Full specifications
| Build volume | 248 × 205 × 270 mm |
|---|---|
| Motion system | CoreXY |
| Max print speed | — |
| Max nozzle temperature | 300 °C |
| Max bed temperature | 120 °C |
| Enclosure | Enclosed, actively heated chamber |
| Extruder | Bondtech INDX: one induc |
| Bed leveling | Automatic |
| Multi-color / multi-material | Included — INDX tool changer, 8 tools |
| Camera | Optional |
| Connectivity | Wi-Fi, USB, PrusaLink, Prusa Connect |
| LAN & privacy | Local-first PrusaLink gives a local web interface and lets PrusaSlicer upload over your network, fully offline. Prusa Connect (cloud) is optional. |
| Firmware | Open source |
| Filament compatibility | PLA, PETG, ASA, TPU, PC, PA11, PVB, BVOH, CF blends |
| Release year | 2026 |
| Availability | In production |
| Company | Prusa — Prague, Czech Republic Built in Prague; some models also assembled in the US |
Specs and price last verified November 2026.