Prusa · Czech Republic
XL
$2,649 XL+ single-toolhead assembled (US retail); 2 heads $3,349, 5 heads $4,249
Prusa's 360 mm cube CoreXY toolchanger with up to five heads, now sold as the faster, auto-calibrating XL+.
- Build volume
- 360 × 360 × 360 mm
- Max speed
- —
- Enclosure
- Open frame
- Multi-color
- Add-on
- Camera
- None
- LAN & privacy
- Local-first
About the XL
The Prusa XL is a large-format CoreXY printer with a 360x360x360 mm volume and an active toolchanger that holds one to five independent heads, so multicolor and multi-material prints waste almost no filament. Tom's Hardware called it one of the best printers it has tested, though slow and expensive. In 2026 Prusa refreshed it as the XL+, adding electronic toolhead alignment, 1.5 mm GT belts, a nozzle wiper, better cooling and 10-15 percent more speed; an optional enclosure reaches 50 C. Rivals like the Bambu Lab H2D and Snapmaker U1 are cheaper, but none match its size with five tools.
Pros & cons
What's good
- Huge 360 mm cube build volume
- Up to five toolheads with minimal purge waste
- XL+ adds auto tool alignment and nozzle wiper
- Works fully offline, open ecosystem
What to watch
- Very expensive fully loaded
- Bulky and heavy
- Slower than Bambu rivals
- Enclosure and camera cost extra
Full specifications
| Build volume | 360 × 360 × 360 mm |
|---|---|
| Motion system | Toolchanger |
| Max print speed | — |
| Max nozzle temperature | 290 °C |
| Max bed temperature | 120 °C |
| Enclosure | Open frame |
| Extruder | Direct drive |
| Bed leveling | Automatic |
| Multi-color / multi-material | Optional — Toolchanger (up to 5 heads) |
| Camera | None |
| Connectivity | WiFi, LAN, USB, Cloud |
| LAN & privacy | Local-first PrusaLink gives a local web interface and lets PrusaSlicer upload over your network, fully offline. Prusa Connect (cloud) is optional. |
| Firmware | Open source |
| Filament compatibility | PLA, PETG, TPU, ABS, ASA, PC, PA, CF-filled |
| Release year | 2023 |
| Availability | In production |
| Company | Prusa — Prague, Czech Republic Built in Prague; some models also assembled in the US |
Specs and price last verified October 2026.
Similar printers
Bambu LabH2S
$1,249 · 87
CrealityK2 Plus Combo
$1,199 · 86
QIDIMax4
$1,049 · 82
AnycubicKobra S1 Max
$699 · 81